How to assembly Jack La Lanne's Power Juicer :
Step 1
Place base on a dry flat surface with locking bar in down position as shown. In front of the machine (spout side).
Step 2
Place receptacle on the base, with juicer spout facing direction of locking bar. Settle receptacle into alignment.
Step 3
Place filter inside receptacle, matching the opening on its bottom to the screw peg connected to the base.
Step 4
Place blade inside filter, centered over screw peg. Using orange crescent tool, place its pegs into the holes in the blade and turn clockwise until tightened.
IMPORTANT: Do not over tighten as the screw peg will break. Remove crescent tool and set aside.
CAUTION: Do not leave tool inside juicer.
Step 5
Place lid with built-in pulp guard attached on top of receptacle, making certain it is snugly aligned with the pulp guard facing in the opposite direction of the juice spout. Lock lid into place by lifting locking bar up until it clicks into grooves located on both sides of the lid. Make sure locking bar is in the full upright, locked position.
IMPORTANT: The unit will not start until this bar is properly locked in place.
Step 6
Insert pusher into chute. Always use pusher to feed fruits and vegetables into unit. Push gently, never force. The blade will do the work.