Sunday, September 26, 2010

Jack La Lanne's Troubleshooting

This post about Troubleshooting of Jack La Lanne's Power Juicer

Problem : The motor does not run after being switched on
• Check to see if unit is plugged in.
• Locking bar is not locked in place properly.
• Check if all parts are assembled properly.
• Check if there is any residue left between blade and receptacle.
• Check to see if food is stuck to the bottom of the pusher.

Problem : The motor is running with loud noise and shaking
• Check that all parts are assembled properly and in the correct position.
• Juicing overripe fruit may result in too much pulp and will clog the filter. Turn machine off and clean the filter.

Problem : The motor is running. The spout is in the downward position, but no juice is coming out.
• Turn the power off and unplug the machine. Wait for blade to stop spinning. Use a toothpick to loosen any obstruction in the non-drip spout

Problem : The motor overheats causing the power to automatically shut off.
• The motor needs to warm up for 10 seconds
before use.
• The fruits and vegetables may be soft or overripe.
• There may be too much pulp in the filter. Turn machine off and clean the filter.
• Motor stops running due to the built-in feature, the overheat safety control.

Problem : Juice splashes from the rim of the receptacle
• This is normal situation.